FLASH SUKSES HP TETEP MATI TOTAL

[rozhal]

N95 1 SIM KONDISI MATI TOTAL, KONDISI BELUM TERJAMAH HARDWARE (MENURUT USER NICH)
SEBELUM FLASH SAYA READ UTK MENGETAHUI VERSI FIRMWARE :
T6226_05C_PCB01_GPRS_MT6226_S01.B10_CHINA_V1105C.B IN
DAN COBA DONWLOAD I MAIN SUPPORT DENGAN VERSI YG SAMA PULA:
T6226_05C_PCB01_GPRS_MT6226_S01.B10_CHINA_V1105C.B IN
DAN HASIL FLASHNYA:

COM5 selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
eeprom backup enabled, it may takes several minutes !
Action: write NOR flash
"smart write" active
write: Firmware
skip: Customization/Language Pack
skip: Customization
skip: Eeprom/ffs
Boot...
Press and HOLD Power button now !
baud autodetection active
19200 autodetect
Connecting, wait...
Initializing[6226:8A02:8A01]...
CPU: MT6226
high speed boot disabled
chip: 0031:E141:3734
high speed disabled
boot step size: 0002
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: 01227E22202200:29EA0000000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
detecting chip #01 in region #00...
flash: 01227E22202200:29EA0000000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
number of flash chip/regions detected: 02/01
Initialize Done
Set baud...
921600
Set baud Done
Initialize bootcode...
Initialize bootcode Done
Check firmware integrity...
device parameters autodetection in progress..
detecting chip #00 in region #00...
flash: 01227E22202200:29EA0000000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
detecting chip #01 in region #00...
flash: 01227E22202200:29EA0000000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
it's time to stop: 290000EA18F09FE518F09FE518F09FE518F09FE518F09FE5
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [enhanced] generation
security area#1 is Ok
security area#1 backup saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_security\i d.2DFDCBF5.[T6226_05C_PCB01_GPRS_MT6226_S01.B10_CHINA_V1105C.B IN_73DFF5A2].rpl
identification#1 detection finished
device-id: 2DFDCBF5
identification#1 protocol ver: 04
ver. sw1: T6226_05C_PCB01_GPRS_MT6226_S01.B10_CHINA_V1105C.B IN
ver. sw2: B10_CHINA_V1105C, 5D0A208C
ffs offset/size: 00E00000/00200000
detect device identification#2...
detection phase #1...
.
warning: optional information not found,
if phone works well just ignore this warning
detect device identification#2 finished
detecting eeprom/ffs area in 1 chip(s)...
standard eeprom/ffs offset detected: 00E00000
flash: 01227E22202200:29EA0000000000
checking area[00000000]: 00000000-00FFFFFF...
eeprom/ffs found near: 00E00000
detecting eeprom/ffs size...
eeprom/ffs size: 00200000
ffs chip: 00
eeprom/ffs area: 00000000:00E00000-00FFFFFF
Check firmware integrity Done
Check firmware content...
Check firmware content Done
Backup required data...
reading [eeprom[T6226_05C_PCB01_GPRS_MT6226_S01.B10_CHINA_V1105C.B IN]]...
file saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_eeprom[T6226_05C_PCB01_GPRS_MT6226_S01.B10_CHINA_V1105C.B IN]_20080507-224756.B0E.bin
flash: 01227E22202200:29EA0000000000
Backup required data Done
Patch required data...
Patch required data Done
Special operation...
Special operation Done
Write...
detect device identification#2...
detection phase #1...
.
warning: optional information not found,
if phone works well just ignore this warning
detect device identification#2 finished
security area#1 calculation...
done
file saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_system_log _2DFDCBF5_T6226_05C_PCB01_GPRS_MT6226_S01.B10_CHIN A_V1105C.BIN_73DFF5A2_20080507-225251.B0X.bin
Area: Firmware
flash: 01227E22202200:29EA0000000000
Write: Firmware
detect device identification#2...
detection phase #1...
.
warning: optional information not found,
if phone works well just ignore this warning
detect device identification#2 finished
Write Done
Finalization...
Finalization Done
file saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_system_log _2DFDCBF5_T6226_05C_PCB01_GPRS_MT6226_S01.B10_CHIN A_V1105C.BIN_73DFF5A2_20080507-225303.B0X.bin
Finished, time used: 482 sec
Remove/Install battery now !

DAN SAYA HIDUPKAN TETEP MATI TOTAL.
PERTANYAAN SAYA:
1.APA INFINITY BOX UTK FLASHER KURANG BAGUS/BELUM FULL FLASHER ?
2.ATAU CARA FLASHING SAYA KELIRU ATAU FILE KURANG?
3.BOX APA YG BISA UNTUK FULL FLASH HP CINA (BAGUS)

TOLONG MODERATOR ATAU REKAN2 YG PUNYA SOLUSI,....

[along80202005]

setelah flash harus complete format.

coba dulu complete format

[rozhal]

Maksudnya setelah proses complet,baru format ffs ya bos?sdh tapi erorr bos.

[along80202005]

hmm, error waktu flash complete??

bisa post log nya di sini..

thanks

[Titan_wonder]

aku pernah dpt kasus spt itu..di flash 3x..kok tetap dead,,kadang2x icflash nggak terdetek...akhire check HW...cek vio cpu kurang normal...reball...hidup...


nb

tp sebelum itu coba flash selain infinity...lebih sepp pake spiderman ( katanya PAKAR SIH ..;) )...kalo tetap aja...nggak salah cek HW........;)

[tingteng]

pernah juga dpt kasus kaya gitu , tapi waktu tak cobain dl flash pake yg complete (flash+eeprom) dari supportnya infi, (battery di ganti powersupply) hidup bagus tuh.

[cirebon2000]

coba flash skalian masukin file eprom nya gmn ?

[smseval]

coba pake Veking bos, kemarin saya dapat kasus MyG B889 diflash pertama pake Infinity matot, setelah dicoba flash ulang dgn file download support area hp tetap matot.
dua mingguan ngerjainnya hasilnya tetap sama.
kemudian ada masuk hp type yg sama dalam kondisi matot, dibackup file flsahnya menggunakan Veking dan diflash ulang pada hp yang pertama tadi langsung nyala.
dan di flash lagi kepada hp yg masuk kedua (dalam kondisi matot), nyala juga.

[cirebon2000]

veking mantep ya
jd ngiler nih