err...mismatch solusi hwk v209

[wiro]

Nokia phones give error:
"ERR: CMT ALG Boot CERT MISM" or "CMT 2nd Boot CERT Mismatch" on "Check" or "Flash"

Problem:
--------
Some UFS manufacturers used a National LP2951C M33 (3.3V) regulator, instead of a LP2951C M30 (3.0V) regulator (IC - U6)

Workaround:
-----------
Change regulator to LP2951C M30

If you are 100% sure that your UFS has the correct regulator of M30 and you have checked the output using a voltage meter, you should then check the phones hardware.

--------------------------------------------------------------------------------
Last edited by Odia The Ultimate; 02-02-10 at 15:34.

[wiro]

aku nyoba mantaf banget
syaratnya kabel harus oke
udah banyak yang di coba dan sukses

[Rico]

nice info gann.,,.,.,

[Shifu]

aku nyoba mantaf banget
syaratnya kabel harus oke
udah banyak yang di coba dan sukses

pakai gambar gonk bos biar lebih jelas

[wiro]

buka aja ufsnya kan ketahuan
regulator LP2951C M30
kakinya ada 8

[wiro]

nyoba 2700c

1ST BOOT : C0,07 [Rm-561] [2.0.9.0]
RAPx ID : 000000010000022600010006030C192101033000
EM 1 ID : 00000296
EM 2 ID : 00000B22
RAPx PBID : 28D00110A82D6850E412BF67FE62EABCABA061B8
RAPx MODE : 00
RAPx HASH : 9DDBFCFE6E73CED7D8C6268C8EB85723
RAPx ROID : 273F6D55DFAAF68F
CMT 1ST Boot OK
CMT 2ND Bt: RAP3Gv3_2nd.fg, Ver: 9.11.1
CMT FLID0 : 00898982-00008A31, Int NU48F512
CMT FLCNT : 00000000000000000000000000000000000000
CMT MCID0 : FFFF0000-00000000
CMT 2ND Boot OK
CMT ALGO : RAP3Gv3_algo.fg, Ver: 9.17.0
CMT KSIG0 : 3EA22A1DDA660002E56108DB5072A10F8709443F
CMT VPP : Internal
DUAL LINE : True
CMT ALG Boot OK
IMAGE : rm561__09.80.mcusw
CMT NOR Erase Area: 0x00000000-000006BF
CMT NOR Erase Area: 0x000006C0-0001FFFF
CMT NOR Erase Area: 0x00040000-000BFFFF
CMT NOR Erase Area: 0x000C0000-0013FFFF
CMT NOR Erase Area: 0x00140000-0137FFFF
CMT NOR Erase Area: 0x01380000-0151FFFF
CMT FLASH ERASE OK, Time: 01:47
Written: 8 Certificate(s)
CMT FLASH WRITE OK, Time: 02:07
Chip SECTOR_SIZE: 128k
Warning, Must be Used 128Kb Sector_Size CNT File
CONVERSION: Already 128K Paged Source
IMAGE : rm561__09.80.image_x_blac
CMT NOR Erase Area: 0x01DC0000-0215FFFF
CMT NOR Erase Area: 0x02160000-03FBFFFF
CNT FLASH ERASE OK, Time: 03:44
CNT FLASH WRITE OK, Time: 01:26
IMAGE : rm561__09.80.ppm_x
CMT NOR Erase Area: 0x01520000-01DBFFFF
PPM FLASH ERASE OK, Time: 00:39
PPM FLASH WRITE OK, Time: 00:44
Flashing Completed, Rebooting Mobile
UI Defaults Ok, Time: 00:46
Set UI Factory Defaults Ok, Time: 00:00
Set Full Factory Defaults Ok, Time: 00:00
Set Software Upgrade Defaults Ok, Time: 00:00
Set Security Ok, Time: 00:00
All Done, Time: 11:42

mantap banget untuk 3110,3500,6280,5300,5200,6120...........
tapi sayangnya belum bisa repair wd hik..hik

[birugitu]

iya tuh kapan yah keluar update terbarunya...........waiting.............